Vaporesso Xros 2 Blinking 3 Times: Troubleshooting Guide (2024)

The Vaporesso Xros 2 blinking 3 times indicates a problem with the battery. Make sure it is fully charged and check for any dust or lint in the USB port that could prevent a strong charge.

Resetting the device may also help resolve the issue. In addition, check the pod and coil for any errors or connectivity issues. Ensure that everything is properly screwed in and check for any breaks in the coil. If these steps don’t work, it may be necessary to consult the user manual or seek professional assistance.

Reasons For Blinking

Reasons for Blinking:

Battery Related Problems

If the Vaporesso Xros 2 is blinking three times, it may indicate battery-related issues. An insufficient charge or low voltage can trigger this blinking pattern. Ensure that the device is fully charged, and check the USB port for any obstructions that may hinder proper charging. Dust or lint can be removed using a toothpick to facilitate a strong charge. If the problem persists, consider replacing the battery.

Pod/atomizer Issues

Another potential reason for the blinking of Vaporesso Xros 2 is pod or atomizer-related problems. If the light blinks five times, it typically signifies a problem with the pod. This could be due to incorrect resistance of the atomizer coil. In such cases, checking the coil and ensuring it is securely screwed into the tank is advisable. If using an RDA/RTA, examine if the coil is touching the cap or deck and look for breaks in the coil. Addressing these issues may resolve the blinking problem.

Troubleshooting Steps

If you’re experiencing the issue of your Vaporesso Xros 2 blinking three times, there are several troubleshooting steps you can take to resolve the problem. By following these steps, you can quickly identify and fix any potential issues with your device. Let’s dive into the troubleshooting process:

Checking Battery Charge

The first step in troubleshooting when your Vaporesso Xros 2 is blinking three times is to check the battery charge. A low battery charge is often the reason behind this issue. Make sure that the device is fully charged by connecting it to a reliable power source using the USB cable provided.

If the battery charge is indeed low, it’s recommended to charge the device for a sufficient amount of time until the battery is fully juiced up. During the charging process, ensure that the USB port on the bottom of the device is clean and free from any dust or lint that might hinder the charging process. Use a toothpick or similar object to remove any contaminants if necessary.

Cleaning Usb Port And Pod Connections

In some cases, a blinking indicator light can occur due to poor connectivity between the Vaporesso Xros 2 device and the charging cable or pod. Cleaning the USB port and pod connections can help resolve this issue.

Start by inspecting the USB port on the bottom of the device. If you notice any dust or lint buildup, gently remove it using a toothpick or a small brush. Additionally, examine the pod connections on the device to ensure they are clean and free from any debris or e-liquid residue.

Regularly cleaning the USB port and pod connections can help maintain optimal conductivity, ensuring a reliable connection and preventing the device from blinking three times.

Inspecting Atomizer

If the above steps didn’t resolve the issue, it’s essential to inspect the atomizer of your Vaporesso Xros 2 device. An atomizer malfunction can cause the device to blink three times. Start by examining the atomizer coil, checking for any breaks or irregularities.

Ensure that the coil is securely screwed into the tank and that there is no contact between the coil and the cap or deck if you’re using an RDA/RTA. Establishing proper atomizer setup and coil positioning can help eliminate the blinking issue.

By following these troubleshooting steps, you can address the problem of your Vaporesso Xros 2 blinking three times. Remember to always charge your device fully, clean the USB port and pod connections regularly, and inspect the atomizer for any issues. These steps will help ensure a smooth and enjoyable vape experience.

Technical Support

Technical Support: Vaporesso Xros 2 Blinking 3 Times

Contact Vaporesso Support

If you encounter the Vaporesso Xros 2 blinking three times issue, it might indicate a problem with the battery. To troubleshoot and resolve this, you can contact Vaporesso Support for assistance.

Seeking Professional Help

If you have tried troubleshooting the blinking issue with no success, it’s advisable to seek professional help. Vaporesso experts can provide detailed guidance on fixing the problem efficiently.

User Insights

Encountering the Vaporesso Xros 2 blinking three times can signal a battery issue. Ensure a full charge and check for any dust obstructing the USB port for optimal performance and functionality.

Forums And Communities

When it comes to troubleshooting the Vaporesso Xros 2 blinking 3 times issue, the insights from forums and communities play a crucial role. Vapers often seek advice and solutions from fellow enthusiasts through various platforms, providing valuable user insights to address common problems.

Reddit Discussions

Reddit serves as a popular platform for vapers to discuss and seek assistance regarding vape-related issues. Users often share their experiences with the Vaporesso Xros 2 blinking 3 times problem, offering practical tips and solutions based on their own encounters.

Preventive Measures

Proper maintenance and avoiding common mistakes are essential to prevent the Vaporesso Xros 2 from blinking three times. By following these preventive measures, you can ensure a smooth vaping experience without any interruptions.

Proper Maintenance

To maintain your Vaporesso Xros 2 and prevent it from blinking three times, it is important to adhere to proper maintenance practices. Here are some tips:

  • Regularly clean the device, including the pod and battery, using a soft cloth or cotton swab.
  • Check the USB port on the bottom of the device for any dust or lint that could hinder proper charging. Remove any contaminants using a toothpick.
  • Ensure that the device is fully charged before use to prevent low voltage issues that may cause blinking.
  • If you notice any leaks or condensation in the pod area, clean it thoroughly and replace the pod if necessary.
  • Store your device in a cool and dry place to avoid any damage or malfunction.

Avoiding Common Mistakes

Many vapers unknowingly make common mistakes that can lead to the Vaporesso Xros 2 blinking three times. By being aware of these mistakes, you can prevent any issues. Here are some mistakes to avoid:

  1. Overcharging the battery: Make sure to monitor the charging process closely and unplug the device once it reaches full charge. Overcharging can lead to battery issues and cause the device to blink.
  2. Using incompatible pods or coils: Always use pods and coils that are specifically designed for the Vaporesso Xros 2. Using incompatible ones can result in resistance errors and lead to blinking.
  3. Not priming the coil properly: Before using a new coil, it is important to prime it by adding a few drops of e-liquid directly onto the cotton wick. Failure to prime the coil can result in dry hits and cause the device to blink.
  4. Chain vaping: Taking rapid and consecutive puffs without allowing time for the device to cool down can cause overheating and trigger the blinking mechanism. Take breaks between puffs to prevent this.
  5. Ignoring warning messages: If the device displays any warning messages or indicators, such as low battery or coil errors, take appropriate action immediately. Ignoring these warnings can lead to blinking or other issues.

Manufacturer Guidelines

The Vaporesso Xros 2 is an innovative, high-quality vaping device. However, encountering issues such as the device blinking three times can be frustrating. In such instances, it is essential to refer to the manufacturer guidelines to troubleshoot and resolve the problem effectively. Understanding the reading instruction manual and error codes is crucial for optimizing your vaping experience.

Reading Instruction Manual

Every Vaporesso Xros 2 kit includes a comprehensive instruction manual that provides detailed information on usage, maintenance, and troubleshooting. It’s crucial to familiarize yourself with the manual to understand the device’s functionality and how to resolve common issues. The manual contains step-by-step instructions, diagrams, and safety precautions to ensure a seamless vaping experience. It’s essential to consult the manual before attempting any troubleshooting to avoid potential errors.

Understanding Error Codes

When the Vaporesso Xros 2 blinks three times, it indicates a specific error code related to the battery voltage being too low or over-discharging. Understanding these error codes is vital for diagnosing the issue accurately. By referring to the manual’s error code section, users can identify the exact nature of the problem and take appropriate corrective measures. This proactive approach can prevent further complications and ensure the efficient functioning of the device.

Ultimately, adhering to the manufacturer guidelines by thoroughly reading the instruction manual and understanding error codes is crucial for effectively addressing the Vaporesso Xros 2 blinking three times issue. By following these guidelines, users can troubleshoot issues confidently and maximize the performance of their vaping device.

Frequently Asked Questions For Vaporesso Xros 2 Blinking 3 Times

Why Is My Vape Flashing 3 Times And Not Working?

When a vape flashes 3 times and doesn’t work, it signals a battery issue. Ensure the device is fully charged and check for dust in the USB port.

Why Is My Vaporesso Xros 2 Not Working?

If your Vaporesso XROS 2 is not working, try taking a few “dry hits” without activating the battery. If that doesn’t work, check the battery, pod, or vape itself. Ensure the device is fully charged and remove any dust or lint from the USB port.

If the light blinks three times, there may be an issue with the battery.

What Does The Light On The Xros 3 Mean?

The light on the XROS 3 vape indicates specific issues. For instance, three blinks mean low battery, and five blinks may signal a problem with the pod.

How Do I Fix A Short Circuit In My Vape?

If your vape has a short circuit, try taking a few dry hits or checking the battery and coil. Ensure proper charging and look for any coil breaks or connections. Clean the USB port and coil, and ensure everything is screwed in tightly.

If the issue persists, seek professional assistance or replace the vape.

Why Is My Vaporesso Xros 2 Blinking Three Times?

The device indicates a low battery voltage. Try charging it.


To troubleshoot the issue of your Vaporesso Xros 2 blinking three times, there are a few things you can try. First, make sure that the device is fully charged and check for any dust or lint in the USB port that could be affecting the charge.

If that doesn’t solve the problem, you may need to check the battery or the pod itself. It’s important to ensure the atomizer coil’s resistance is correct and that the coil is fully screwed into the tank. If all else fails, you can try resetting your Vaporesso Xros by hitting the on button five times.

By following these steps, you should be able to resolve the blinking issue and continue enjoying your vape.

Vaporesso Xros 2 Blinking 3 Times: Troubleshooting Guide (2024)
Top Articles
Latest Posts
Article information

Author: Sen. Ignacio Ratke

Last Updated:

Views: 5750

Rating: 4.6 / 5 (56 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Sen. Ignacio Ratke

Birthday: 1999-05-27

Address: Apt. 171 8116 Bailey Via, Roberthaven, GA 58289

Phone: +2585395768220

Job: Lead Liaison

Hobby: Lockpicking, LARPing, Lego building, Lapidary, Macrame, Book restoration, Bodybuilding

Introduction: My name is Sen. Ignacio Ratke, I am a adventurous, zealous, outstanding, agreeable, precious, excited, gifted person who loves writing and wants to share my knowledge and understanding with you.